Secret Codes

General Codes:
*#06# – Display’s IMEI number.
*2767*3855# – This code will Format your device to factory state (will delete everything on phone).
*#*#4636#*#* – Display’s Phone information, usage statistics and battery.
*#*#273282*255*663282*#*#* – This code will Immediately backup of all media files.
*#*#197328640#*#* – This code will Enable test mode for service.
*#*#1111#*#* – Will display FTA software version.
*#*#1234#*#* – Will show PDA and firmware version.
*#*#232339#*#* – Wireless LAN tests.
*#*#0842#*#* – This code is used for Backlight/vibration test.
*#12580*369# – Display’s Software and hardware info.
*#*#2664#*#* – This code is used for Testing the touchscreen.
*#9900# – System dump mode.
*#9090# – Diagnostic configuration.
*#*#34971539#*#* – Will display Detailed camera information.
*#872564# – USB logging control.
*#301279# – HSDPA/HSUPA Control Menu.
*#7465625# – This code will display phone’s lock status.
*#0*# – Enter the service menu on newer phones like Galaxy S III.
*#*#7780#*#* – Reset the /data partition to factory state.
Basic Codes:
*#*#7780#*#* – This code is used for factory restore setting.This will remove Google account setting and System and application data and settings.
*2767*3855# – This code is used for factory format, and will remove all files and settings including the internal memory storage. It will also re install the firmware.
*#*#4636#*#* – This code show information about your phone and battery.
*#*#273283*255*663282*#*#* – This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.

*#*#197328640#*#* – This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.
*#*#7594#*#* – This code enable your “End call / Power” button into direct power off button without asking for selecting any option(silent mode, aero plane and power-off).
*#*#8255#*#* – This code can be used to launch G Talk Service Monitor.
*#*#34971539#*#* – This code is used to get camera information. Please avoid update camera firmware option.
W-LAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* – W-LAN test (Use “Menu” button to start various tests).
*#*#232338#*#* – Shows WiFi MAC address.
*#*#1472365#*#* – GPS test.
*#*#1575#*#* – Another GPS test.
*#*#232331#*#* – Bluetooth test.
*#*#232337#*# – Shows Bluetooth device address.
Codes to launch various Factory Tests:
*#*#0842#*#* – Device test (Vibration test and BackLight test).
*#*#0588#*#* – Proximity sensor test.
*#*#0*#*#* – LCD test.
*#*#2664#*#* – Touch screen test.
*#*#2663#*#* – Touch screen version.
*#*#0283#*#* – Packet Loopback.
*#*#0673#*#* OR *#*#0289#*#* – Melody test.
*#*#3264#*#* – RAM version.
Code for firmware version information:
*#*#1111#*#* – FTA SW Version.
*#*#2222#*#* – FTA HW Version.
*#*#44336#*#* – PDA, Phone, CSC, Build Time, Changelist number.
*#*#4986*2650468#*#* – PDA, Phone, H/W, RFCallDate.
*#*#1234#*#* – PDA and Phone.



These codes are used only by technicians, So be careful with them and use it at your own risk.